Guide · fishing
How to Tie an Artificial Camola for Fishing
Dear fishing friends, many of you, after seeing the video in which I fished with the camola at tenkara, asked me to make a tutorial on how to tie it. Here it is. This is the larva fly pattern I recommend starting with: a hook, copper wire and a strand of wool make an imitation of a larva, the first stage of an insect’s life. In the video I show it very slowly, on a size 14 hook, so that you can take inspiration; a few years later I tied it again for the sea, and I will tell you about that too.
Clicking loads the video from YouTube, which sets its own cookiesIn short. A grub or straight hook, size 10, 12 or 14, in the vise; wrap the copper wire from the head to the bend and secure a strand of mohair wool there; wrap the wool toward the eye, with more turns near the head to give it a tapered shape, and finish with a knot; then bring the copper back up in wide turns, the ribbing, and make a strong little head with three finishing knots. More copper means more weight: for the bottom or midwater.
What is a camola
Camolas are imitations of larvae, like the classic maggots: tiny, pretty, and in little streams with shallow, clear water they work beautifully. This simple pattern is good for wet-fly and nymph fishing: once in the water, the wool soaks through and sinks.
What you need for this larva fly pattern
- grub or straight hooks, size 10, 12 or 14. In the video I use a 14; for the sea an 8;
- copper wire, for the body and a fairly strong little head;
- mohair wool: white, ocher yellow, light green or orange. If it is not mohair that is fine too, any wool;
- colored silk or cotton threads, for those who prefer to start the body with tying thread;
- a vise, a bobbin and a knotting tool. Mine is a ballpoint pen from which I removed the ink tube.
How to tie it, step by step
1. Copper wire from the head to the bend
Secure the hook in the vise. Take the copper wire and start wrapping it from the head to the bend of the hook. Here, with the copper, secure the end of the strand of wool.
2. Wool toward the eye
Take the strand of wool and wrap it in the opposite direction, until you reach the eye of the hook, with more turns near what will be the head: the camola must have a tapered shape, plumper at the front. You can make it slimmer or plumper, as you like.
3. The finishing knot with the wool
Still using the wool, make the finishing knot and cut off the excess. For the knot I use the knotting tool, the empty pen: pass the thread through the pen, make the loop, lay it against the head and tighten. In the video I do it very slowly.
4. Copper ribbing and head
Take the copper wire again and go back toward the eye in wide turns: this is the ribbing, which marks the rings of the larva. When you reach the eye, make a strong little head with several turns of copper and finish with three finishing knots.

The camola is ready. By adding or reducing the copper wire you make heavier or lighter camolas, so they travel near the bottom or in midwater.
The camola for the sea
In 2024 I tied it again for the sea, a little bigger, on a size 8 hook, with a few differences. Start the body with black tying thread in the bobbin, all the way to the bend, where you secure the mohair wool and a gold wire; bring the wool back up to build the body; then the gold wire makes close ribbing, because underwater it gives off reflections. If you have no gold wire, silver or simple copper wire is fine: something that reflects a little light. Finishing knot and a drop of superglue. Mohair wool has a solid core and fuzz all around it: in the water, when you pull the camola, that fuzz vibrates, and the fish cannot do anything but bite.
Clicking loads the video from YouTube, which sets its own cookiesHow to fish with the camola
In the stream, with tenkara: tenkara fishing with a camola is the day I try it with a very short bamboo rod. In little streams with shallow, clear water you have fun, fishing there is very relaxing and you catch lots of fish.
In the sea I tried it in Fuerteventura with a little three-piece bamboo rod, built there, vegetable-fiber twine as long as the rod and one and a half meters of nylon: the camolas I had tied for tenkara in the stream work in the sea too. I saw the fish chasing it; I paused, and at that moment they grabbed it on the fly, the same technique as in the stream. A damselfish, which they call fula there, and some fine salema bit, all given their freedom back. You have to have the courage to try new things: cast the camola where you see schools of fish. Then I stopped, because people were arriving to swim and it is not right to continue.
Clicking loads the video from YouTube, which sets its own cookiesFrequently asked questions
What does the artificial camola imitate?
A larva, the first stage of the insect: camolas imitate the classic maggots. It is fished as a wet fly or nymph.
What hook and wool do you need?
Grub or straight hooks, size 10, 12 or 14; a 14 in the video, an 8 for the sea. White, ocher yellow, light green or orange mohair wool; if it is not mohair that is fine too.
What is the copper wire for?
It makes the body under the wool, the wide-turn ribbing and the little head. More copper means more weight: the camola goes to the bottom; less copper, it works in midwater.
How do you make the finishing knot?
With the knotting tool, a ballpoint pen without the ink tube: make a loop with the thread, lay it against the head and tighten. In the video you see it very slowly.
Does it work in the sea too?
Yes: in Fuerteventura, with the little bamboo rod, it caught a damselfish and some salema. With pauses in the retrieve, as in the stream.
Keep reading
The camola, spider and kebari with my drawings are in The DIY Fishing Manual. On the site you will find the kebari fly, the bobbin, the fly box, tenkara fishing and all the DIY fishing.
The fun is in making it yourself: while we tie it we think, “who knows what fish I will catch with this camola.” Now all you have to do is go fishing with your homemade camola.
Tight lines, guys!
